Reset Ink Level on Canon,PG 40/41 using iPtool software

This problem usually appear after refilled the cartridge on the canon printer and ink level indicator showing the ink cartridge is empty although you have filled a cc Ink into the cartridge. And if the problem occur you cannot using your printer to print. The solution you must reset ink level on the printer if you want your computer work again.

If you have a problem like that you ca follow this tutorial to solve your printer problem, here how:

1. Turn of the printer and Disconnect the power cable to the printer.
2. Press power button on the printer. While pressing the button connect the power cable to the power source (the power indicator will light in green)
3. While still holding power button press resume button twice – orange blink and return to green.
4. Release the power button, then the PC will recognize new cartridge installed (If the power indicator on the printer steady in green you continue to Steps 5)
5. Run the IPtools software, please await after this software detect your printer correctly or you can set the printer model on “Change Model” section.
6. Click “reset black and reset color” button to reset the ink level and Click “reset main and reset platen” to reset waste ink counter. After clicked the button you will see ink level of the cartridge on in the IPTol info has 100% and WP and WM has set to 0. Click Exit on IPTool
7. Turn off the printer and turn on again.

On the reset procedure above usually the problem found on steps 1-4 to make the printer steady light in green. On my experiment if steps 1-4 does not work on your printer, you can use manual reset method for canon iP1700 before continue to steps 5.

reset waste ink canon iP4000

Here this step by step to resetting waste ink counter printer canon iP4000
1. With the printer plugged in and powered off, press and hold the
Resume/Cancel button, then press and hold the Power button.
Do not release the buttons. The LED light should be green to
indicate that a function is selectable
2. While holding the Power button, release the Resume/Cancel button,
do not release the Power button
3. While holding the Power button, press the Resume/Cancel button 2 times,
and then release both the Power and Resume/Cancel buttons. Each time the
Resume/Cancel button is pressed, the LED lights alternately in orange and
green, starting with orange.
4. When the LED light is green, press the Resume/Cancel button 4 times. Each
time the Resume/Cancel button is pressed, the LED lights alternately in
orange and green, starting with orange.
5. Press the Power button. The LED lights in green, and the reset is performed.
When the operation completes, the printer returns to the menu selection
mode automatically
6. Press the power button to exit service mode.

E-Books How to Refill Toner Cartridge and Inkjet Cartridge

If the cartridge (for inkjet printer) or toner (for toner printer) in the printer empty or almost empty usually everyone also ask “How to refill my printer cartridge?”. On this e-books you can find out the answer for the question. Maybe this ebbok the only ebbok that privide complete tutorial how to refill almost all toner cartridge or inkjet cartridges

Several printer types that mentioned in this ebook tutorial that is Brother, Canon, Compaq, Dell, Digital, Epson, Hewlett Packard (HP), Lexmark, Okidata, Pitney Bowes, Sharp, Xerox cartridges. If you having priner service station or you are home user you must download this useful ebook because in this contain complete tutorial to refill printer cartridges.

All tutorial on this e-book has completed with the picture so it will make the user can follow the tutorial “how to refill printer cartridges” in this e-book. The e-book tutorial is produced by www.uni-kit.com, If you want to download the e-book you can download from following link (I hope this ebook will helpful and useful for you):

Download ebook Tutorial how to refill inkjet cartridges (for inkjet printer types)
Download ebook Tutorial how to refill toner cartridges (for laser printer types)

Reset Printer Epson CX3900 dan Epson CX4900

In general there are two ways to reset the printer of any brand, that is by way of manual and automated by using software resetter. In this article we will discuss about how to reset the printer Epson CX3900 and Epson CX4900 automatically use additional software.

Actually there are two software that can be used to reset the pronter Epson CX3900 and Epson CX4900 adjustment program that is using and use the SSC Sorftware. This time we will only discuss about how to reset using the Adjustment program. How to reset using the SSC software on the printer Epson CX3900 and Epson CX4900 can be found in another article on this blog.

Here areare the steps – steps :
* Download the adjustment software, for Epson CX3900 Epson CX4900 separately here.
* Change the settings on your computer date to 23 January 2007
* Extract and run the adjustment program by clicking on the file “AdjProg.exe” then click ACCEPT
* Click the adjustment mode, OK
* Select waste ink counter and double click to run it
* Clean counter the printer by clicking the “Initialization”
* Turn off your printer and restart, and your printer will return to normal

Reset Ink Level Canon MX300 Cartridges

The Canon PIXMA MX300 is All-in-One Inkjet Printer designed for office uses. This canon printer combine scan, fax, copy, and print into one easy machine. Canon MX300 can scan vivid images with color resolutions up to 4800 x 1200 dpi. This all in one printer compatible with Windows Vista, Windows XP, Windows 2000, and Mac OS X 10.2.8 to 10.4.x8 operating systems and printer using PG-40 black cartridge and CL-41 color cartridge.

“solusi-printer.maherna.com” have not found the software resetter for Canon Pixma MX300 in internet but don’t worry if you have problem with this multifuction canon printer, you can reset it manually. This reset method is to reset ink level in Canon MX300 if your printer stop to print after refilling the cartridges. Update: severals readers say, this reset methods also work on Canon MX308.

Here the Solution to reset the ink level for Canon Pixma MX300 follow this steps to reset the ink level in your canon MX300.

1. Switch off the Canon MX300 and disconnect the power cable.
2. While press and hold the power button, Connect the power cable to electric socket.
3. While pressing the power button, press the “Cancel/Stop” button (red button).
4. Now release the power button and the printer turns into a kind of factory mode. Wait for 10 seconds until it says “idle”.
5. Press “>” (next button) once “Shipping Mode 3? then Press the “OK” button. Press “OK” again for “without cleaning”.
6. A test page will print.
7. Open the cover, like you are about to change the cartridges.
8. Disconnect the power cable again without switch off the printer.
9. Take out the both cartridges.
10. Close the cover.
11. Connect the power cable and turn on the printer.
12. Now just put the cartridges back and the ink level in the canon Pixma MX300 have full again.

Reset Canon MP258

First make sure that the power cable and usb cable are connected, before you perform the reset procedure. And download the resetter (DOWNLOAD NOW MP258 RESET)
FIRST STEPS: Entering Service Mode
You have to enter in service mode in order to used the resetter. To do that follow this procedure,

1. Turn off the printer without pulling the power cords.
2. Hold down STOP/RESET button and press Power button.
3. Keep holding down Power button and let STOP/RESET button go.
4. Then Press STOP/RESET button twice then let BOTH buttons go.
5. You will notice that the Alternate Blinking error is gone, this means that the printer is in Service Mode state.

SECOND STEPS: Using the Resetter

1. After you download the resetter, extract it and double click “servicetool.exe”
2. Click Reload Button and you will get a new USB port.
3. Load some papers in your printer and press the “Main” Button once, wait until the printing is done.
4. Then press “EEPROM Clear” button to clear EEPROM.
5. Then press EEPROM button and the printer will print some text.
6. Then power off the printer(sometimes you have to press twice the power button to turn off) and turn on again. and its done!

Led Error kode IP Series

Led Error code for Canon IP1300, IP1700, IP1200, IP1880, IP1980 Led Error code for Canon IP1300, IP1700, IP1200, IP1880, IP1980

Having problem with Canon IP1300, IP1700, IP1200, IP1880, IP1980. Sign that looked to be only led blinking. Following some solutions problem of printer that marked with led blinking.

3x Orange 1x green

Problem : any problem with printer mechanics

Solution: If you don’t have knowledge about printer mechanic, will better if bring the printer to Canon service center.

4x orange 1x green

Problem printer absorber full

Solution: Reset the printer using generaltools or software resetter. If not work using reset manual. Each printers having different set of manual reset

5x orange 1x green

Problem: Black or Color cartridge trouble.

Note: problem is usually caused many matters, for example chips error, conector is dirty, etc.

7x orange 1x green

Problem: Black or Color cartridge trouble.

Note: problem is usually caused many matters, for example chips error, conector is dirty, etc.

8x orange 1x green

Problem printer absorber full (Waste Ink Pad Full)

Solution: Reset the printer using generaltools or software resetter. If not work using reset manual. Each printers having different set of manual reset

15x orange 1x green

Problem: Black or Color cartridge trouble.

How to Reset Counter Canon ip2770

his tutorial to answer all question all about software resetter Canon iP2770 and I hope this tutorial info can help all this blog visitors who need tutorial reset Canon iP2770.

Canon iP2770 is newest all-in-one canon printer that designed for Home and small office user can print with maximal resolution up to 4800×1200 dpi. This canon printer using cartridge type PG-810, CL-811 (PG-810XL, CL811XL Optional) and using Hi-Speed USB 2.0 interface to connected to computer.

Canon Pixma iP 2770 support for Windows 2000 (SP4 only), Win XP, Vista and Windows 7 and also support for MAC OS: Macintosh OS X 10.4.11 – 10.6.
Here the tutorial reset for Canon ip2770 (Click the picture below to view the tutorial – the tutorial are is English and Thai language)

Note: All Download link and tutorial is taken from Thailand printer forum (http://www.compute.co.th). Use this info and tutorial as your own risk. Here the download link software resetter for Canon iP2770:Canon iP2770 Resetter
Note: This original tutorial info is from http://tricks-collections.com

canon waste tank reset for canon i70

Below is a procedure that in most cases should resolve a Canon i70 waste tank issue

1) Close the print head cover, and turn off the printer. While pressing the Resume/Cancel button, press the Power button.

(Do not release the buttons. The LED lights in green to indicate that a function is selectable.)

2) While holding the Power button, release the Resume/Cancel button.

(Do not release the Power button.)

3) While holding the Power button, press the Resume/Cancel button 3 times, and then release the Power and Resume/Cancel buttons.

(Each time the Resume/Cancel button is pressed, the LED lights alternately in either orange or green, starting with orange.)

During initialization, the LED blinks in green.

4) When the LED stops blinking and lights in green, press the Resume/Cancel button 4 times (Each time the Resume/Cancel button is pressed, the LED lights alternately in either orange or green, starting with orange.)

After the function (menu) is selected, press the Power button. The LED lights in green, and the selected function is performed. (When the operation completes, the printer returns to the menu selection mode automatically.)

*** 4 times Green Waste ink counter resetting Both the main and borderless print waste ink counters are cleared.
Driver Canon i70 :Download

MP390 Waste ink tank full

1. Printer ‘on.’
2. Press: “Additional Functions” button
Press “Scan” button
Press “Copy” button
Press “Scan” button
3. Now it says, “Service Mode / #1 SSSW.
4. Keep hitting “+” [which is the right arrow]; it will go through #1 to #11 (Date/Time), then “Service Report,” and, lastly, “Test Mode.” Then hit “Set.”
5. Now you will have another set of selections. Keep hitting “+” [the right arrow] to go from #1(DRAM) to #8 (Printer Test). Then hit “Set.”
6. When it finishes some sort of function, “Please Wait” will be replaced by “-8-2+” Then hit “+” and it should then say “-8-3+” and you hit “Set.”
7. The screen should now say “EEPROM Clear.” [You may need to press “Set” then, to get to the next step? My notes aren’t clear.]
8. Option 0 should be “select ink count.” Press “Set.”
9. Press the “Stop/Reset” button.
10. Press the “On/Off” button.
11. Wait for the printer to restart.

I have had the “waste ink tank near full” message twice in the almost-3-years I’ve been using my printer and it’s still functioning fine. No “waste ink” coming out the bottom!

Canon PIXMA MP476 All-in-one Inkjet Printer

The Canon PIXMA MP476 uses the same basic design as the PIXMA MP510. The black-and-silver body measures 451 x 353 x 169mm. The silver scanner lid conceals an A4-size flatbed scanner. Because the MP476 lacks an automatic document feeder, you can't scan legal-size documents.
The paper handling system is simple. A paper input support flips open in the rear and the front panel of the printer folds open to serve as the output tray. Next to the output tray is a small door that conceals two memory card slots. The slots accept most common types of memory cards, though some require an adapter (which is not included).

Hidden away under the memory cards is a PictBridge-enabled USB port (it's so hidden that we missed it on first inspection). You can use it to connect PictBridge cameras for direct printing, or to attach an optional Bluetooth adapter (sold separately) for wireless printing. The one thing you can't attach to the USB port is a flash thumbdrive; the Dell Photo 926 lets you print files from an attached flash drive.

The control panel is hidden underneath a flip-up panel on the top side of the printer. Embedded on the underside of the panel is a 1.8-inch graphical LCD. The control panel is basic, though well-organized. Buttons include task buttons for copy, scan, and memory card modes, menu navigation buttons, and two start buttons--one for black-only and one for color.

The PIXMA MP476 uses a two-tank ink system: One black and one tri-color. It ships with regular capacity cartridges, but you can replace both with high-capacity versions.

CANON IP8500 WASTE TANK FULL RESET CODE

First thing you need to do is print an EEPROM information page, step number 2 below.
Once you have an EEPROM print you can reset the waste ink counter, if needed, which is step number 4 below.

Service Mode: This printer has a service mode for service-related settings and for performing test prints. The operator panel buttons are used to enter the desired service mode.
Service Mode Operations

With the printer powered off, hold down the resume button and press the power button.
While holding down the power button, release the resume button and press the resume button twice in succession. Now release the power button.

The indicator will blink in green and remain lit in green.
Select one of the following service mode functions by pressing the “RESUME Button” the specified number of times.

1 time = Service test print.
2 times = EEPROM information print.
3 times = EEPROM initialization
4 times = Waste ink counter resetting
5 times = Destination settings
6 times = Print head deep cleaning
Then press the “Power Button” one time to perform the function just selected.

Canon BJC 2100 waste ink tank full

ERROR: Uesd ink tank is full

Waste Error Reset
1: Remove the Cartridge
2: Unplug the AC Power Cord
3: Open Front access panel
3: Hold down the RESUME/RESET button and plug in the AC power cord
4: Release RESUME/RESET after plugging in the AC Power cord.
5: Press the RESUME/RESET once within 5 seconds and release the RESUME/RESET .
6: Press and HOLD RESUME/RESET for two seconds or more and release it.
7: Press and HOLD RESUME/RESET for two seconds or more and release it.
8: Unplug AC Power Cord to set data

If it does not work. Try some more times. Thanks every one above.

Service Manual

Service manual download Link for some printers like Epson Printers , Canon Printers , Hewlett Packard > Printers , Brother Printers, Lexmark Printers and Xerox.
Service Manual for Canon Printers:

* Service manual for canon Pixma iP3000 Download
* Service manual for canon Pixma iP4200 Download
* Service manual for canon Pixma iP5200 Download
* Service manual for canon Pixma iP5200R Download

Service Manual for Epson Printers:

* Service manual for Epson DFX 8500 Download
* Service manual for Epson Stylus Photo 890 Download
* Service manual for Epson Stylus Photo 1280 Download
* Service manual for Epson Stylus Pro 7600 download
* Service manual for Epson Stylus Pro 9600 download

Service manual for Brother Printers:

* Service manual for Brother HL-4000CN, download
* Service manual for Brother MFC-890 / MFC-5200C, download
* Service manual for Brother MFC-590 / MFC-5100C, download
* Service manual for Brother PT-9200PC, download
* Service manual for Brother SC-2000, download

Service Manual for Lexmark Printers:

* Service manual for Lexmark W812 4022, download
* Service manual for Lexmark T62X 4069, download
* Service manual for Lexmark Optra R 4049, dowload
* Service manual for Lexmark Optra W810, download

Service Manual for HP Printers:

* Service manual for HP Color LaserJet 1500, download
* Service manual for HP Color LaserJet 2500 download
* Service manual for HP Color LaserJet 4500 Series download
* Service manual for HP Color LaserJet 4550 Series download
* Service manual for HP Color LaserJet 4600 Series download
* Service manual for HP Color LaserJet 5500 Series download
* Service manual for HP Color LaserJet 5550 download
* Service manual for HP Color LaserJet 8500 Series download
* Service manual for HP Color LaserJet 9500 Series download
* Service manual for HP LaserJet 4V download
* Service manual for HP LaserJet 4MV download
* Service manual for HP LaserJet 5L download
* Service manual for HP LaserJet 5Si Series download
* Service manual for HP LaserJet 6L download
* Service manual for HP LaserJet 1000 Series download
* Service manual for HP LaserJet 1010 Series download
* Service manual for HP LaserJet 1000A download
* Service manual for HP LaserJet 1160 download
* Service manual for HP LaserJet 1200 Series download
* Service manual for HP LaserJet 1320 Series download
* Service manual for HP LaserJet 2100 download
* Service manual for HP LaserJet 2200 download
* Service manual for HP LaserJet 2300 Series download
* Service manual for HP LaserJet 2400 Series download
* Service manual for HP LaserJet 3200 download
* Service manual for HP LaserJet 3300 Series download
* Service manual for HP LaserJet 3500 Series download
* Service manual for HP LaserJet 3700 Series download
* Service manual for HP LaserJet 4000 Series download
* Service manual for HP LaserJet 4100 download
* Service manual for HP LaserJet 4200 Series download
* Service manual for HP LaserJet 4300 Series download
* Service manual for HP LaserJet 5000 Series download
* Service manual for HP LaserJet 5100 Series download
* Service manual for HP LaserJet 8100 Series download
* Service manual for HP LaserJet 8150 Series download
* Service manual for HP LaserJet 9000 Series download
* Service manual for HP 1100/1100A Laserjet download

Service Manual for Samsung Printers:

* Service manual for Samsung ML 1650, download
* Service manual for Samsung ML 1651N, download
* Service manual for Samsung ML 6000, download
* Service manual for Samsung SCX 4100, download

Service Manual for Xerox:

* Service manual for Xerox Phaser 3100MFP, download
* Service manual for Xerox Phaser 3124 , download
* Service manual for Xerox Phaser 3125 , download
* Service manual for Xerox Phaser 3150 , download
* Service manual for Xerox Phaser 3200MFP , download part 1 | download part 2
* Service manual for Xerox Phaser 3200MFP , download
* Service manual for Xerox Phaser 3435 , download
* Service manual for Xerox Phaser 3450 , download part 1 | download part 2 | download part 3
* Service manual for Xerox Phaser 4 4 00 , download part 1 | download part 2 | download part 3
* Service manual for Xerox Phaser 4500 , download
* Service manual for Xerox Phaser 4510 , download
* Service manual for Xerox Workcentre PE220 , download 1 | download 2 | download 2

Led Error code for Canon IP1300, IP1700, IP1200, IP1880, IP1980

Having problem with Canon IP1300, IP1700, IP1200, IP1880, IP1980. Sign that looked to be only led blinking. Following some solutions problem of printer that marked with led blinking.

3x Orange 1x green

Problem : any problem with printer mechanics

Solution: If you don’t have knowledge about printer mechanic, will better if bring the printer to Canon service center.

4x orange 1x green

Problem printer absorber full

Solution: Reset the printer using generaltools or software resetter. If not work using reset manual. Each printers having different set of manual reset

5x orange 1x green
Problem: Black or Color cartridge trouble.

Note: problem is usually caused many matters, for example chips error, conector is dirty, etc.

7x orange 1x green

Problem: Black or Color cartridge trouble.

Note: problem is usually caused many matters, for example chips error, conector is dirty, etc.

8x orange 1x green

Problem printer absorber full (Waste Ink Pad Full)

Solution: Reset the printer using generaltools or software resetter. If not work using reset manual. Each printers having different set of manual reset

Canon Multipass F30, F60 & F80 waste tank reset code

Resetting the Waste Ink Volume Counter


1) Enter SERVICE MODE.....By pressing Menu THEN Copy THEN #.
2) Select TEST MODE.
3) Select [8] PRINTER TEST in TEST MODE.
4) Select 3. [EEPROM CLEAR].
5) Select 0. [INK COUNT].
6) Press the [OK] key. (On F30 printers, skip step (6) since there is no [OK] key .)
7) Press the [Stop/Reset] key (returning to the state of 3)), and then press the [ON/OFF] key.

Canon i80 Waste Ink Tank Full

Try this to reset the error.

1) Close the print head cover, and turn off the printer. While pressing the Resume/Cancel button, press the Power button. (Do not release the buttons. The LED lights in green to indicate that a function is selectable.)

2) While holding the Power button, release the Resume/Cancel button. (Do not release the Power button.)

3) While holding the Power button, press the Resume/Cancel button three times, and then release the Power and Resume/Cancel buttons. (Each time the Resume/Cancel button is pressed, the LED lights alternately in either orange or green, starting with orange.) During initialization, the LED blinks in green.

4) When the LED stops blinking and lights in green, press the Resume/Cancel button the 4 times. (Each time the Resume/Cancel button is pressed, the LED lights alternately in either orange or green, starting with orange.)

5) Press the Power button. The LED lights in green, and the
selected function is performed. (When the operation completes, the printer returns to the menu selection mode automatically.)

6) Power off then back on and test.

Canon MP145 waste ink counter

The method used to is by reset the printer

Error ink cartridges are not installed properly (error E5) :
Step 1 : Push Power switch by continue (Push Power On/Off)
Step 2 : inserrt plug(Hold and Press Power)
step 3 : Push Reset button 1x, Let Power button, Push Reset twice till 0
Step 4 : Push + display change from 0 to 1 (push button + to change 0 to 1)
Step 5 : Push Power switch again , Printer will be print 1 page
(push power button–>start button till 1 page.)
step 6 : Open cover
Step 7 : Unplug power cable
Step 8 : Take out ink PG 40 and PG 41
Step 9 : Insert plug again
Step 10 : Push power switch
Step 11 : Open cover (scan cover)
Step 12 : Inksert ink PG 40 , PG 41 again

These are the step How to Reset waste ink counter (error E16) :
1. Turn off power button (power button is in ),
Press and Hold STOP/RESET then Push ON/OFF button
2. Hold ON/OFF button, press STOP/RESET button 2x
3. Let both of button and printer in to SERVICE MODE
4. Printer will be charging
5. After printer finish charging, ush STOP/RESET button 4x. (Waste ink counter reset)
6. Every time you push STOP/RESET button ,
ON/OFF lamp will change green and oranye.
7. Turn off printer dan and take out POWER button
8. Turn on printer again.

The number of the Reset :
button pressing LED Function Remarks
0 time Green Power off
1 time Orange Service pattern print
2 times Green EEPROM print
3 times Orange EEPROM reset
4 times Green Waste ink counter reset
5) Unplug cable power. (for MP145 / MP150)
6) Turn Off Power. (for MP160)

Error Code/Kode Error :
E2-2 = No paper (ASF)
E3-3 = Paper jam
E4 = No ink
E5-5 = The ink cartridges are not installed or a non-supported ink cartridge is installed, or the ink cartridges are not installed properly
E8 = Waste ink absorber full, or platen waste ink absorber full
E9 = The connected digital camera / video camera does not support Camera Direct Printing
E14 = The Ink cartridges whose destination are wrong
E15 = Ink cartridge is not installed E16 – Ink remaining is unknown
E16 -E19 = Failed to scan head alignment sheet
E22 = Carriage error
E23 = Paper feed error
E24 = Purge unit error
E25 = ASF(cam) sensor error
E26 = Internal temperature rise error
E27 = Waste ink absorber full or platen waste ink absorber full
E28 = Ink cartridge temperature rise error -
E29 = EEPROM error
E33 = Paper feed position error
E35 15 = USB Host VBUD overcurrent error – USB
E37 17 = Abnormal motor driver error
E40 20 = Other hardware error
E42 22 = Scanner error