Reset Canon MP258

First make sure that the power cable and usb cable are connected, before you perform the reset procedure. And download the resetter (DOWNLOAD NOW MP258 RESET)
FIRST STEPS: Entering Service Mode
You have to enter in service mode in order to used the resetter. To do that follow this procedure,

1. Turn off the printer without pulling the power cords.
2. Hold down STOP/RESET button and press Power button.
3. Keep holding down Power button and let STOP/RESET button go.
4. Then Press STOP/RESET button twice then let BOTH buttons go.
5. You will notice that the Alternate Blinking error is gone, this means that the printer is in Service Mode state.

SECOND STEPS: Using the Resetter

1. After you download the resetter, extract it and double click “servicetool.exe”
2. Click Reload Button and you will get a new USB port.
3. Load some papers in your printer and press the “Main” Button once, wait until the printing is done.
4. Then press “EEPROM Clear” button to clear EEPROM.
5. Then press EEPROM button and the printer will print some text.
6. Then power off the printer(sometimes you have to press twice the power button to turn off) and turn on again. and its done!

Led Error kode IP Series

Led Error code for Canon IP1300, IP1700, IP1200, IP1880, IP1980 Led Error code for Canon IP1300, IP1700, IP1200, IP1880, IP1980

Having problem with Canon IP1300, IP1700, IP1200, IP1880, IP1980. Sign that looked to be only led blinking. Following some solutions problem of printer that marked with led blinking.

3x Orange 1x green

Problem : any problem with printer mechanics

Solution: If you don’t have knowledge about printer mechanic, will better if bring the printer to Canon service center.

4x orange 1x green

Problem printer absorber full

Solution: Reset the printer using generaltools or software resetter. If not work using reset manual. Each printers having different set of manual reset

5x orange 1x green

Problem: Black or Color cartridge trouble.

Note: problem is usually caused many matters, for example chips error, conector is dirty, etc.

7x orange 1x green

Problem: Black or Color cartridge trouble.

Note: problem is usually caused many matters, for example chips error, conector is dirty, etc.

8x orange 1x green

Problem printer absorber full (Waste Ink Pad Full)

Solution: Reset the printer using generaltools or software resetter. If not work using reset manual. Each printers having different set of manual reset

15x orange 1x green

Problem: Black or Color cartridge trouble.

How to Reset Counter Canon ip2770

his tutorial to answer all question all about software resetter Canon iP2770 and I hope this tutorial info can help all this blog visitors who need tutorial reset Canon iP2770.

Canon iP2770 is newest all-in-one canon printer that designed for Home and small office user can print with maximal resolution up to 4800×1200 dpi. This canon printer using cartridge type PG-810, CL-811 (PG-810XL, CL811XL Optional) and using Hi-Speed USB 2.0 interface to connected to computer.

Canon Pixma iP 2770 support for Windows 2000 (SP4 only), Win XP, Vista and Windows 7 and also support for MAC OS: Macintosh OS X 10.4.11 – 10.6.
Here the tutorial reset for Canon ip2770 (Click the picture below to view the tutorial – the tutorial are is English and Thai language)

Note: All Download link and tutorial is taken from Thailand printer forum (http://www.compute.co.th). Use this info and tutorial as your own risk. Here the download link software resetter for Canon iP2770:Canon iP2770 Resetter
Note: This original tutorial info is from http://tricks-collections.com

canon waste tank reset for canon i70

Below is a procedure that in most cases should resolve a Canon i70 waste tank issue

1) Close the print head cover, and turn off the printer. While pressing the Resume/Cancel button, press the Power button.

(Do not release the buttons. The LED lights in green to indicate that a function is selectable.)

2) While holding the Power button, release the Resume/Cancel button.

(Do not release the Power button.)

3) While holding the Power button, press the Resume/Cancel button 3 times, and then release the Power and Resume/Cancel buttons.

(Each time the Resume/Cancel button is pressed, the LED lights alternately in either orange or green, starting with orange.)

During initialization, the LED blinks in green.

4) When the LED stops blinking and lights in green, press the Resume/Cancel button 4 times (Each time the Resume/Cancel button is pressed, the LED lights alternately in either orange or green, starting with orange.)

After the function (menu) is selected, press the Power button. The LED lights in green, and the selected function is performed. (When the operation completes, the printer returns to the menu selection mode automatically.)

*** 4 times Green Waste ink counter resetting Both the main and borderless print waste ink counters are cleared.
Driver Canon i70 :Download

MP390 Waste ink tank full

1. Printer ‘on.’
2. Press: “Additional Functions” button
Press “Scan” button
Press “Copy” button
Press “Scan” button
3. Now it says, “Service Mode / #1 SSSW.
4. Keep hitting “+” [which is the right arrow]; it will go through #1 to #11 (Date/Time), then “Service Report,” and, lastly, “Test Mode.” Then hit “Set.”
5. Now you will have another set of selections. Keep hitting “+” [the right arrow] to go from #1(DRAM) to #8 (Printer Test). Then hit “Set.”
6. When it finishes some sort of function, “Please Wait” will be replaced by “-8-2+” Then hit “+” and it should then say “-8-3+” and you hit “Set.”
7. The screen should now say “EEPROM Clear.” [You may need to press “Set” then, to get to the next step? My notes aren’t clear.]
8. Option 0 should be “select ink count.” Press “Set.”
9. Press the “Stop/Reset” button.
10. Press the “On/Off” button.
11. Wait for the printer to restart.

I have had the “waste ink tank near full” message twice in the almost-3-years I’ve been using my printer and it’s still functioning fine. No “waste ink” coming out the bottom!

Canon PIXMA MP476 All-in-one Inkjet Printer

The Canon PIXMA MP476 uses the same basic design as the PIXMA MP510. The black-and-silver body measures 451 x 353 x 169mm. The silver scanner lid conceals an A4-size flatbed scanner. Because the MP476 lacks an automatic document feeder, you can't scan legal-size documents.
The paper handling system is simple. A paper input support flips open in the rear and the front panel of the printer folds open to serve as the output tray. Next to the output tray is a small door that conceals two memory card slots. The slots accept most common types of memory cards, though some require an adapter (which is not included).

Hidden away under the memory cards is a PictBridge-enabled USB port (it's so hidden that we missed it on first inspection). You can use it to connect PictBridge cameras for direct printing, or to attach an optional Bluetooth adapter (sold separately) for wireless printing. The one thing you can't attach to the USB port is a flash thumbdrive; the Dell Photo 926 lets you print files from an attached flash drive.

The control panel is hidden underneath a flip-up panel on the top side of the printer. Embedded on the underside of the panel is a 1.8-inch graphical LCD. The control panel is basic, though well-organized. Buttons include task buttons for copy, scan, and memory card modes, menu navigation buttons, and two start buttons--one for black-only and one for color.

The PIXMA MP476 uses a two-tank ink system: One black and one tri-color. It ships with regular capacity cartridges, but you can replace both with high-capacity versions.

CANON IP8500 WASTE TANK FULL RESET CODE

First thing you need to do is print an EEPROM information page, step number 2 below.
Once you have an EEPROM print you can reset the waste ink counter, if needed, which is step number 4 below.

Service Mode: This printer has a service mode for service-related settings and for performing test prints. The operator panel buttons are used to enter the desired service mode.
Service Mode Operations

With the printer powered off, hold down the resume button and press the power button.
While holding down the power button, release the resume button and press the resume button twice in succession. Now release the power button.

The indicator will blink in green and remain lit in green.
Select one of the following service mode functions by pressing the “RESUME Button” the specified number of times.

1 time = Service test print.
2 times = EEPROM information print.
3 times = EEPROM initialization
4 times = Waste ink counter resetting
5 times = Destination settings
6 times = Print head deep cleaning
Then press the “Power Button” one time to perform the function just selected.