Reset Ink Level on Canon,PG 40/41 using iPtool software

This problem usually appear after refilled the cartridge on the canon printer and ink level indicator showing the ink cartridge is empty although you have filled a cc Ink into the cartridge. And if the problem occur you cannot using your printer to print. The solution you must reset ink level on the printer if you want your computer work again.

If you have a problem like that you ca follow this tutorial to solve your printer problem, here how:

1. Turn of the printer and Disconnect the power cable to the printer.
2. Press power button on the printer. While pressing the button connect the power cable to the power source (the power indicator will light in green)
3. While still holding power button press resume button twice – orange blink and return to green.
4. Release the power button, then the PC will recognize new cartridge installed (If the power indicator on the printer steady in green you continue to Steps 5)
5. Run the IPtools software, please await after this software detect your printer correctly or you can set the printer model on “Change Model” section.
6. Click “reset black and reset color” button to reset the ink level and Click “reset main and reset platen” to reset waste ink counter. After clicked the button you will see ink level of the cartridge on in the IPTol info has 100% and WP and WM has set to 0. Click Exit on IPTool
7. Turn off the printer and turn on again.

On the reset procedure above usually the problem found on steps 1-4 to make the printer steady light in green. On my experiment if steps 1-4 does not work on your printer, you can use manual reset method for canon iP1700 before continue to steps 5.

reset waste ink canon iP4000

Here this step by step to resetting waste ink counter printer canon iP4000
1. With the printer plugged in and powered off, press and hold the
Resume/Cancel button, then press and hold the Power button.
Do not release the buttons. The LED light should be green to
indicate that a function is selectable
2. While holding the Power button, release the Resume/Cancel button,
do not release the Power button
3. While holding the Power button, press the Resume/Cancel button 2 times,
and then release both the Power and Resume/Cancel buttons. Each time the
Resume/Cancel button is pressed, the LED lights alternately in orange and
green, starting with orange.
4. When the LED light is green, press the Resume/Cancel button 4 times. Each
time the Resume/Cancel button is pressed, the LED lights alternately in
orange and green, starting with orange.
5. Press the Power button. The LED lights in green, and the reset is performed.
When the operation completes, the printer returns to the menu selection
mode automatically
6. Press the power button to exit service mode.

Led Error kode IP Series

Led Error code for Canon IP1300, IP1700, IP1200, IP1880, IP1980 Led Error code for Canon IP1300, IP1700, IP1200, IP1880, IP1980

Having problem with Canon IP1300, IP1700, IP1200, IP1880, IP1980. Sign that looked to be only led blinking. Following some solutions problem of printer that marked with led blinking.

3x Orange 1x green

Problem : any problem with printer mechanics

Solution: If you don’t have knowledge about printer mechanic, will better if bring the printer to Canon service center.

4x orange 1x green

Problem printer absorber full

Solution: Reset the printer using generaltools or software resetter. If not work using reset manual. Each printers having different set of manual reset

5x orange 1x green

Problem: Black or Color cartridge trouble.

Note: problem is usually caused many matters, for example chips error, conector is dirty, etc.

7x orange 1x green

Problem: Black or Color cartridge trouble.

Note: problem is usually caused many matters, for example chips error, conector is dirty, etc.

8x orange 1x green

Problem printer absorber full (Waste Ink Pad Full)

Solution: Reset the printer using generaltools or software resetter. If not work using reset manual. Each printers having different set of manual reset

15x orange 1x green

Problem: Black or Color cartridge trouble.

How to Reset Counter Canon ip2770

his tutorial to answer all question all about software resetter Canon iP2770 and I hope this tutorial info can help all this blog visitors who need tutorial reset Canon iP2770.

Canon iP2770 is newest all-in-one canon printer that designed for Home and small office user can print with maximal resolution up to 4800×1200 dpi. This canon printer using cartridge type PG-810, CL-811 (PG-810XL, CL811XL Optional) and using Hi-Speed USB 2.0 interface to connected to computer.

Canon Pixma iP 2770 support for Windows 2000 (SP4 only), Win XP, Vista and Windows 7 and also support for MAC OS: Macintosh OS X 10.4.11 – 10.6.
Here the tutorial reset for Canon ip2770 (Click the picture below to view the tutorial – the tutorial are is English and Thai language)

Note: All Download link and tutorial is taken from Thailand printer forum (http://www.compute.co.th). Use this info and tutorial as your own risk. Here the download link software resetter for Canon iP2770:Canon iP2770 Resetter
Note: This original tutorial info is from http://tricks-collections.com

CANON IP8500 WASTE TANK FULL RESET CODE

First thing you need to do is print an EEPROM information page, step number 2 below.
Once you have an EEPROM print you can reset the waste ink counter, if needed, which is step number 4 below.

Service Mode: This printer has a service mode for service-related settings and for performing test prints. The operator panel buttons are used to enter the desired service mode.
Service Mode Operations

With the printer powered off, hold down the resume button and press the power button.
While holding down the power button, release the resume button and press the resume button twice in succession. Now release the power button.

The indicator will blink in green and remain lit in green.
Select one of the following service mode functions by pressing the “RESUME Button” the specified number of times.

1 time = Service test print.
2 times = EEPROM information print.
3 times = EEPROM initialization
4 times = Waste ink counter resetting
5 times = Destination settings
6 times = Print head deep cleaning
Then press the “Power Button” one time to perform the function just selected.